Inspire CS4 User Manual

25
Polar T31Coded
Included with your unit is a Polar heart rate monitor; Model T31.
Technical specification
Battery Life:
Heart Rate Sensor Material:
Strap material Buckle:
Fabric:
Average 2500 hours
Polyurethane
Polyurethane
Nylon 46 % Polyester 32% Latex 22%
Wearing the heart rate sensor
1) Fasten one end of the heart rate sensor to the elastic strap (Figure 1).
2) Moisten the two grooved areas on the back. (Figure 1)
3) Clip the heart rate sensor around your bare chest and adjust the strap to fit comfortably
(Figure 2).
4) Check that the wet grooved areas are firmly against your skin, and that the text on the
heart rate sensor is in an upright position and at the center of your chest.
Cleaning: Rinse under running water after every use. Clean with mild soap and water when needed.
Wipe dry with a soft towel. Do not bend the sensor, since it may damage the electrodes. Never
store the heart rate sensor wet, in a damp environment or in any kind of non-breathing material,
such as a plastic bag or a sports bag. Sweat and moisture may keep the electrodes wet and the heart
rate sensor activated. This will shorten the battery life. Keep cool and dry.

Inspire CS4 Specifications

General

Brand	Inspire
Model	CS4
Category	Fitness Equipment
Language	English