INSTEON Hub Developer's Guide

INSTEON Hub: Developer’s Guide
Page 18 © 2013 INSTEON
IM Serial Command Charts
The following charts describe the IM Commands individually in a chart format, grouped by functionality.
These are the same IM Commands as in the IM Serial Command Summary Table
13
, which is ordered by
Command Number.
Note that IM Commands sent by an IM to the host begin at 0x50 and IM Commands sent by the host to
an IM begin at 0x60. When the host sends an IM Command to an IM, the IM will respond with a message
according to the IM Serial Communication Protocol
6
.
In This Section
INSTEON Message Handling
19
Commands for sending and receiving INSTEON messages.
X10 Message Handling
27
Commands for sending and receiving X10 messages.
INSTEON ALL-Link Commands
29
Commands for sending ALL-Link Commands with automatic handling of ALL-Link Cleanup Commands.
ALL-Linking Session Management
33
Commands for creating ALL-Links between an IM and other INSTEON devices.
ALL-Link Database Management
36
Commands for managing ALL-Link Records in the IM’s ALL-Link Database.
IM Status Management
43
Commands for resetting and configuring the IM.
IM Input/Output
51
Commands for managing the IM’s SET Button and LED.

INSTEON Hub Specifications

General

Product Name	INSTEON Hub
Model Number	2245-222
Connectivity	Ethernet
Communication Protocol	INSTEON
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	85% non-condensing