INSTEON Hub Developer's Guide

INSTEON Hub: Developer’s Guide
Page 12 © 2013 INSTEON
IM Serial Commands
The IM Serial Command set is a simple but complete interface between a host application and an
INSTEON network. For example, a microcontroller in a thermostat could use an INSTEON Powerline
Modem chip to send and receive messages to other INSTEON or X10 devices on the home’s powerline.
In this section, the IM Serial Commands are presented twice, once as a summary table, and again as a
series of charts grouped by functionality.
In This Section
IM Serial Command Summary Table
13
Describes all of the IM Serial Commands in table form ordered by Command Number.
IM Serial Command Charts
18
Describes all of the IM Serial Commands using individual charts for each Command, grouped by
functionality.

INSTEON Hub Specifications

General

Product Name	INSTEON Hub
Model Number	2245-222
Connectivity	Ethernet
Communication Protocol	INSTEON
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	85% non-condensing