INSTEON Hub Developer's Guide

Name: INSTEON Hub
Brand: INSTEON
Rating: 4 (1 reviews)

59 pages

To Next Page

To Previous Page

INSTEON Hub: Developer’s Guide

IM Serial Communication Protocol and Settings

In This Section

IM Serial Communication Protocol

Gives the protocol for communicating serially with an INSTEON Modem.

Table of Contents2
Introduction6
The INSTEON Hub6
Other Documents Included by Reference7
INSTEON Developer's Guide7
INSTEON Conformance Specification7
INSTEON Command Tables Document7
INSTEON Device Categories and Product Keys Document7
INSTEON Modem Reference8
Software Reference8
IM Serial Communication Protocol and Settings10
IM Serial Communication Protocol11
INSTEON HUB Communication Syntax and Examples11
Control Commands11
Query Commands11
Command Syntax12
Insteon Commands to Send to the Hub for the PLM12
Hub Commands12
Commands that will be in the INSTEON Buffer12
Group Commands13
Individual Device Control Commands (Point to Point)13
Linking Example13
ID Request Example15
Status Request Example15
IM Power-Up and Reset States16
IM Power-Up Behavior16
IM Factory Reset State16
IM Serial Commands17
IM Serial Command Summary Table18
IM Serial Command Charts23
INSTEON Message Handling24
Send INSTEON Standard or Extended Message24
INSTEON Standard Message Received27
INSTEON Extended Message Received28
Set INSTEON ACK Message Byte29
Set INSTEON ACK Message Two Bytes30
Set INSTEON NAK Message Byte31
X10 Message Handling32
Send X1032
X10 Received33
INSTEON ALL-Link Commands34
Send ALL-Link Command34
ALL-Link Cleanup Failure Report36
ALL-Link Cleanup Status Report37
ALL-Linking Session Management38
Start ALL-Linking38
Cancel ALL-Linking39
ALL-Linking Completed40
ALL-Link Database Management41
Get First ALL-Link Record41
Get Next ALL-Link Record42
Get ALL-Link Record for Sender43
ALL-Link Record Response44
Manage ALL-Link Record45
IM Status Management48
Reset the IM48
User Reset Detected49
Get IM Configuration50
Set IM Configuration51
Get IM Info53
Set Host Device Category54
RF Sleep55
IM Input/Output56
Button Event Report56
LED on57
LED off58
Cancel Cleanup59

Other manuals for INSTEON Hub

Quick Start Guide8 pages

Questions and Answers:

Need help?

Do you have a question about the INSTEON Hub and is the answer not in the manual?

INSTEON Hub Specifications

General

Product Name	INSTEON Hub
Model Number	2245-222
Connectivity	Ethernet
Communication Protocol	INSTEON
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	85% non-condensing

Related product manuals

INSTEON ON/Off Switch

INSTEON Motion Sensor

34 pages

INSTEON Hub Developer's Guide

Table of Contents

Other manuals for INSTEON Hub

Questions and Answers:

INSTEON Hub Specifications

Related product manuals