Intel S5500BC Product Specification

Appendix B: Sensor Tables Intel
®
Server Board S5500BC TPS
Intel order number: E42249-003 Revision 1.0
86
 Event Data
This is the data included in an event message generated by the associated sensor. For
threshold-based sensors, these abbreviations are used:
R: Reading value
T: Threshold value
 Rearm Sensors
The rearm is a request for the event status for a sensor to be rechecked and updated
upon a transition between good and bad states. Rearming the sensors can be done
manually or automatically. This column indicates the type supported by the sensor. The
following abbreviations are used in the comment column to describe a sensor:
A: Auto-rearm
M: Manual rearm
I: Rearm by init agent
 Default Hysteresis
Hysteresis setting applies to all thresholds of the sensor. This column provides the count
of hysteresis for the sensor, which can be 1 or 2 (positive or negative hysteresis).
 Criticality
Criticality is a classification of the severity and nature of the condition. It also controls the
behavior of the Control Panel Status LED.
 Standby
Some sensors operate on standby power. These sensors may be accessed and / or
generate events when the main (system) power is off, but AC power is present.
Table 41. Integrated BMC Core Sensors

Intel S5500BC Specifications

General

Brand	Intel
Model	S5500BC
Category	Server Board
Language	English