Need help?Do you have a question about the Intellian v150NX and is the answer not in the manual?
Explains the meaning of WARNING, CAUTION, and NOTE statements used in the manual.
Lists general safety precautions for using the antenna before installation.
Provides an overview of the v150NX Ku-band VSAT maritime antenna system.
Summarizes major features like RF performance, single cable, dual antenna, modularity, and diagnostics.
Describes the antenna pedestal, radome, and RF components.
Lists the functions supported by the ACU.
Information on assembling an optional air-conditioner under the radome.
Lists the components included in the ACU box for installation.
Details antenna dimensions, mounting hole patterns, and mast design.
Guidance on choosing a site, minimizing blockage, and avoiding RF interference.
Key considerations for installing system cables, including protection and routing.
Instructions for routing and securing cables on the mast.
Step-by-step guide for safely unpacking and removing the antenna from its crate.
Guidance on positioning and securing the antenna onto the mast and radome.
Detailed steps for terminating and connecting RF and AC power cables to the antenna.
Criteria for ACU location and its physical dimensions for installation.
Instructions for mounting the ACU and connecting system components.
Overview of rear panel connectors and detailed instructions for various cable hookups.
Pinout details for various ACU connectors like Console, Modem, PC, and BUC interfaces.
Methods for establishing data communication between ACU and PC via Ethernet or USB.
Instructions for connecting to the ACU wirelessly using a Wi-Fi dongle.
Steps to power on the system and access the AptusNX interface.
Guide to configure the satellite modem settings within AptusNX.
Detailed steps for commissioning the antenna, including GPS, Heading, Bow Offset, Blockage, and Satellite selection.
Performing cable compensation and the final line-up test with the satellite operator.
Generating and saving configuration reports after system setup is complete.
Identifies controls, indicators, and menu items on the ACU's front panel and screen.
Describes system startup sequence and ACU control mode status.
Executing diagnosis tests and viewing antenna/interface information.
Using USB for log download, firmware upload, backup, and restore operations.
How to back up and restore antenna settings using USB storage.
Overview of AptusNX software and steps to access its interface.
Details on page login, top menus, account management, and system registration.
Customizing the dashboard by adding, removing, and arranging panels.
Utilizing shortcuts and referencing the install wizard for system setup.
Accessing tools for firmware upgrades, iARM, satellite library, and spectrum analysis.
Performing diagnosis, accessing logs, and finding support resources.
Configuring ship, GPS, antenna, satellite, network, modem, and SNMP settings.
Detailed technical specifications for the antenna system and ACU.
Environmental operating and survival conditions for the system.
Details of the product warranty period and terms.
Guide to setting up the optional dual antenna system.
Steps to assign roles and run the install wizard for dual antenna systems.
How to monitor dual antenna system status via AptusNX dashboard.
Comprehensive guide for unpacking and assembling the optional air conditioner unit.
To Next Page
General
