B-1
Appendix B. Assembling Air-Conditioner (Optional)
Appendix B
Assembling Air-Conditioner (Optional)
The purpose of this document is to provide you with the necessary information to properly assemble the air-
conditioner. We strongly recommend you to review this procedure thoroughly to assemble the air-conditioner
successfully.
Air-Conditioned AntennaStandard Antenna
1. Unpacking Wooden Crate
1. The pallet should be lifted by means of a forklift. To unpack the wooden crate, follow the procedure below.
Remove the xing screws (8 EA) from a front panel. Detach the front panel.
CAUTION
CAUTION
Be careful with the direction of the panel that you must open rst.
2. Remove the xing screws (9 EA) from a top panel. Detach the top panel by using a forklift carefully.
To Next Page
Loading...
Need help?
General
