B-8
Appendix B. Assembling Air-Conditioner (Optional)
6.2 Assembling Duct Plate Assembly
Assemble the duct plate assembly including duct plate and duct ange using the M4x12L (8EA) hex head
wrench bolt.
Duct Plate
M4x12L Bolt
(8EA)
Duct Flange
Description Q’ty Size Remarks
Hex Head Wrench Bolt 8 M4x12L
Bolt Kit for Duct Plate Assembly
Spring Washer 8 M4
Flat Washer 10 M4
Nut 8 M4
6.3 Drilling Duct Hood
To assemble the duct hood, the duct hood must have the Ø5.5 hole (4EA). Place the duct hood on the duct
plate then drill the Ø5.5 hole (4EA) by using a drill.
CAUTION
CAUTION
When placing the duct hood on the duct plate, the duct ange must be completely covered inside the
duct hood.
To Next Page
Loading...
