B-11
Appendix B. Assembling Air-Conditioner (Optional)
Installed Cables
AC Power Cable for Air-con
(From Ship's Power)
AC Power Cable for Antenna
(From Ship's Power)
Circuit Brake Box
Cable Junction
Air-con Controller Cable
TX, RX, 48V DC Power
Cable (4200 mm)
(From ACU)
Radome Hatch in Use
Air-con Controller
Installed Cables
Power Switch Unit
Cable Holders
Air-Con. Power Cable
Connecting Cables outside Radome
Fix cables located outside of the radome to the bracket using cable ties as shown in the gure.
9. Connecting Flexible Duct Hose
1. Measure the proper length of the exible duct hose between duct hatch hole and the air conditioner hole,
then cut the duct hose (2EA).
2. Connect each duct hose from the duct hatch hole to the air conditioner hole. Fix the connected duct hoses
by using the hose clamp.
Flexible Duct
Hose (2EA)
Radome Bottom View
To Next Page
Loading...
