Intellian v150NX - Page 120

B-14
Appendix B. Assembling Air-Conditioner (Optional)
2. Cover the lifting straps to the radome, then connect to eye-bolts (4EA) on the air-conditioner frame.
Eye-Bolt
(4EA)
Lifting Strap
(4EA)
3. Lift up the Radome hanging all four straps on a crane hook. Straighten out the lifting straps prior to lifting
the entire load of the antenna. Placing the antenna on the ship's mast.
WARNING
WARNING: Be careful when lifting the heavy object. Incorrect handling of the heavy object may
lead to injury to the installers and/or cause signicant damage to the unit.
12. Mounting Antenna on Mast
1. After placing the antenna on the ship's mast, x the base frame to the mast using bolts. When tightening
bolts, apply Loctite #263 to the bolt's threads to ensure the bolts are fastened rmly.
Assembling Position (8EA)
M12x60L Hex Bolt (BUMAX) (8EA)
M12 Lock Washer (16EA)
Base Frame
Mount Plate
M12 Lock Washer (16EA)
M12 Nut (BUMAX)(8EA)
Mast
Description Q’ty Size Remarks
Hex Bolt (BUMAX) 9 M12x60L
Bolt Kit for Mounting Antenna on MastLock Washer 17 M12
Nut (BUMAX) 9 M12
Use 18 mm Spanner or Torque Wrench
NOTE
NOTE: Refer to "Tightening Torque Nm" in
"Appendix B. Bolt Type Torque spec." and
apply the value when tightening Wrench
Bolts.
WARNING
WARNING: When placing the antenna
on the ship's mast, move it slowly so the
antenna frame does not get damaged.