42
Operating Install Wizard
4. When clicking the "Apply" button after entering the modem settings, this pop-up message will appear.
If you want to automatically save and reboot the system, select the checkbox and click the "Conrm"
button. The system will perform the "iARM Save & Reboot" automatically.
5. After rebooting, Log into the AptusNX again.
6. Go back to the "SETUP"
"Modem/BUC" "Modem Connection" menu. Enter the modem connecting
values. Check the "Connect" button. The antenna system will communicate to modem automatically. You
can check the connected modem name on the screen.
To Next Page
Loading...
