To Next Page

To Previous Page

Operating Install Wizard

(Option 2: Using Library Type)

Description

• Step 1: choose the "Library" button on

the "Tracking Type".

• Step 2: select a satellite in satellite

library list then click the "Start

Searching" button.

Please wait until antenna terminal is

tracking the satellite. The bow offset will

be set up automatically.

• Step 3: check the "Lock On" mark and

click the "Save Satellite" button in the

"Bow Offset" menu to save the bow

offset information to ACU.

If you have no problems, click the "Next"

button.

Step 4: Set Bow Offset

For setting bow offset, a trackable satellite must be selected. There are two satellite tracking methods.

Select the desired tracking type. When Antenna tracks the selected satellite, the bow offset will be set up

automatically pbased on the GPS information.

(Option 1: Using Beam Switch Type)

Description

• Step 1: choose the "Beam Switch"

button on the "Tracking Type".

• Step 2: select a satellite in beam list

then click the "Apply" button.