v60 – Marine Satellite Communication System
66
Heading
Latitude & longitude
Save
LATITUDE LONGITUDE
37 .00N 126.50 E
5. Set the current LATITUDE and LONGITUDE
Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).
Press UP and DOWN arrow keys to increase or decrease the value.
Or press NUMBER keys to set the desired value directly.
Press the OK key to set the parameter.
HEADING
090.0
6. Entry of ships heading is not required when your system is connected to a NMEA0813 or
1:1 Synchro Heading output. Ensure that the supported Gyro Type is set correctly. For v60 if
the ship’s gyrocompass output is Step-by-Step (SBS), separate purchase of a gyro converter
is required.
S AVE ?
YES NO
7. Press LEFT arrow key to move cursor to YES and press OK key to save current settings.
Or move cursor to NO and press OK key to abort and return to the main display.
To Next Page
Loading...
Need help?
General
