v60 – Marine Satellite Communication System
70
Default process type
Processing
DEFAULT PROCESS TYPE
LOAD DEFAULT
4. Press UP and DOWN arrow keys to select DEFAULT PROCESS TYPE*
Press OK key to set the parameter and the processing message will be displayed.
DEFAULT PROCESS TYPE*
LOAD DEFAULT: To reset the antenna back to factory default settings.
BACKUP USER DATA: To backup the antenna settings set by user.
RESTORE USER DATA: To restore the antenna by using the backup user data.
NOTE: When you perform a load default setting, you will lose all the data that is stored on the antenna.
Back up the antenna settings to an external hard drive before performing a reset.
BACK UP ANT INFO
DO NOT TURN OFF!
Key Lock
System menu
Set key lock and
password
Key lock menu
Setup mode
SETUP MODE ?
YES NO
1. Press LEFT arrow key to move cursor to YES and press OK key to enter SETUP mode.
+ANTENNA + SATELLITE
+S YSTEM +INSTALLATION
2. Press DOWN arrow key to move cursor to SYSTEM menu and press OK key to enter it.
+KEY LOCK +VIEW VERSION
3. Press arrow keys to move cursor to KEY LOCK menu and press OK key to enter it.
KEY LOCK UNLOCK P/W
ON 1 590
4. Press UP and DOWN arrow keys to choose whether or not to use key pad lock when
entering the SETUP mode or saving the satellite information. Setup the password for entering
the key pad lock. The factory default is 1590.
To Next Page
Loading...
Need help?
General
