CS3000, Users
Rev A, January, 2011
Page 14 of 35
Serial Output (Optional)
The serial output is accessed through the mode menu under the “Prt t” option. If “0” is
entered it will print on-demand by following the following steps.
1. Press the mode button. The display will show “Print”.
2. Press the mode button once more. Toggle the display to “Yes” by pressing the
lb/kg button.
3. Press the mode button once more and the print command will be sent. After the
print command is sent the scale will return to normal operations. If accumulating
all accumulations will be retained.
If “1” is entered it will print in continuous mode. When in continuous mode a print
command will be sent approximately one line per second.
Print Output Examples
On-demand print mode
GROSS: 1999.8 lb (No tare or accum total)
GROSS: 1999.8 lb (A tare is set)
TARE: 999.8 lb
NET: 1000.0 lb
GROSS: 1999.8 lb (Accumulated total and tare set)
TARE: 999.8 lb
NET: 1000.0 lb
ACC.TOT: 2000.0 lb
GROSS: 1999.8 lb (Accum total, but no tare)
ACC.TOT: 2000.0 lb
Continuous print mode
1999.8 lb
1999.8 lb
1999.8 lb
To Next Page
Loading...
