CS3000, Users
Rev A, January, 2011
Page 28 of 35
Calibration Menu Skip “step”
Cal Mode #
Enter Cal Mode # After “StEP” in Cal Menu
000 Advance through normal calibration menu.
001 or 002 Jump to weight calibration
005 Enter Mode menu. (the same menu that is entered if the cal
strap is in the Run position)
121 Raw Counts display diagnostic
131 Constant power to all load cells diagnostic
311 Default and save all radio settings to the radio
711 Default and save all settings (Leave calibration untouched)
911 Default and save all board memory (settings and calibration)
To Next Page
Loading...
