Intermatic HA07 - Excluding Modules from Network

10 HomeSettings HA07 Wireless Master Controller
Copyright © 2007 Intermatic, Inc.
to your home network through a process called
INCLUSION.
Deleting or “Excluding”
Raise the cover on the HA07 Master Controller.
Bring the HA07 Master Controller within 6 ft. of
the module.
Put the HA07 into EXCLUSION mode by
pressing and releasing the DELETE button on the
HA07.
The word “DEL” will
appear on the screen
and “TRANSMITTING”
will flash in the upper
right corner.
NOTE: If TRANSMITTING stops flashing,
press the DELETE button again.
Press the PROGRAM button (the black button) on
the HomeSettings module you want to add to
the network. This step will prepare the two units
for a clean connection.
If the exclusion was
successful, the word
“SUCCESSFUL” will
show for 2 seconds.
If “NOT SUCCESSFUL” appears, return to
Step 1 and repeat.
Proceed to the Adding or “Including” procedure
on the next page.
(For non-HomeSettings modules, refer to the
instructions provided by the manufacturer.)
1.
2.
3.
4.
5.
•
•
6.