Intermatic HA07 - Time and Date Setup Steps; Setting the System Time

18 HomeSettings HA07 Wireless Master Controller
Copyright © 2007 Intermatic, Inc.
With the HA07 Master Controller set up correctly,
you never have to make manual time adjustments.
Before you begin, raise the cover on the HA07 to
provide access to the timesetting buttons.
NOTE: The procedure will “time out” if you don’t
press any buttons for 10 seconds. If this happens,
press the ON and OFF buttons again.
Step-by-step instructions
Press the MODE button until the
screen displays “CLK” in small
letters at the top of the screen—
for CLOCK mode.
NOTE: Ignore whether the day of the week is
correct or not. It will be automatically corrected
when you set the year.
Press the ENTER button. The
screen flashes the hour.
Press the + or – button to set the
correct hour.
Press the ENTER button to accept
the hour you have set. The
screen flashes the minutes.
Press the + or – button to set the correct minutes.
1.
2.
3.
4.
5.