Setup and User Guide 21
Providing a brighter solution.™
Press the ENTER button
to accept the setting. The
screen flashes back and
forth between “ZONE” and
“CENTer”.
Setting for the Zone for the location
The HA07 Master Controller can accommodate
how far north or south you the device is located,
adjusting for differences in sunrise and sunset.
This is useful if you want to turn lights on and off at
dawn and dusk.
If necessary, press the ENTER button to accept the
setting. The screen flashes back and forth
between “ZONE” and “CENTer”.
Press the + or – button to select the zone that
includes the location.
Use the map below to locate your zone.
d.
1.
2.
To Next Page
Loading...
