Setup and User Guide 9
Providing a brighter solution.™
Let the software guide you
The software was designed to make it easy to set
up your HomeSettings system in a single session.
These step-by-step instructions follow the on-
screen software as it guides you in basic home
automation with your HomeSettings system:
Linking modules to your HA07 controller
Creating “scenes” or groups of modules
controlled by a specific pair of ON/OFF buttons
on your HA07 controller
Setting system time and date
Setting for the zone in the US where you live
Setting exact sunrise and sunset times (optional)
Setting an ON timer “event” that turns a specific
scene(s) on at sunset
Setting an OFF “event” that turns these same
scenes OFF at 11:00 pm
Instructions for optional operations, letting you
make use of the full capabilities of the HA07 master
controller, is provided at www.homesettings.com.
Later on, if you want to come back and change
an item of programming you’ve set during the
following session, you can go directly to the specific
function and follow only those directions.
Preparing the modules
To make sure your network operates at its best, this
preparation will first “delete” the modules from
your network through a process called EXCLUSION.
Then, the preparation will “add” the modules
•
•
•
•
•
•
•
To Next Page
Loading...
Need help?
General
