Setup and User Guide 33
Providing a brighter solution.™
If you want to set up another
event, press the ENTER
button. The screen Displays
the next event for setting up.
Proceed with instructions for setting an ON
event.
If you’re finished setting up events, press the
MODE button to exit programming and enter
AUTO mode, which activates your settings.
Setting up other events at a later time
Follow the instructions on the previous pages to set
up the two kinds of events:
Astronomic-controlled (sunrise or sunset)—
which is explained in setting an ON event on
page 24.
Timer-controlled—which is explained in setting
an OFF event on page 31.
Choose the parts of the routines that apply to your
new event. For example, follow steps for:
Creating an ON or OFF event
Choosing the right days of the week
Setting for whether you want to maintain the
dim level you’ve set for any dimmer modules
Choosing the channels you want the event to
control
•
•
•
•
•
•
To Next Page
Loading...
