Intermatic HA07 - Controller Resetting; Resetting Network Only

Setup and User Guide 39
Providing a brighter solution.™
Resetting the controller
If needed, you can reset the NETWORK and
CHANNEL SETTINGS individually or both together.
NOTE: When resetting a controller, for best
results, each module within the system should be
individually reset also.
Resetting the network only
Press and hold the INCLUDE and DELETE buttons
at the same time for 10 seconds. The screen
displays “RESET”.
Release the INCLUDE and DELETE buttons.
Press and hold the Channel 3 ON/DIM▲ and
OFF/DIM▼ buttons until the screen displays
“NETWRK CLEAR”.
1.
2.
3.