Intermatic HA07 - OFF Events at Specific Time

Setup and User Guide 31
Providing a brighter solution.™
OFF at a specic time
Before you begin
If there are any dimmer-controlled lights in the
scenes you will control with this event, set them at
the dimmed level where you want them.
If necessary, press the MODE
button repeatedly until the top
of the screen displays “PGM”.
Press the ENTER button as
necessary to display blank dashes for entering a
time, and with the event number blinking. This is
a new event.
Press the + button. The screen changes and
flashes the days of the week.
Continue pressing the + button
until the day or series of days
you want the timer to turn OFF
is blinking. You can select:
Every day
Weekdays only
An individual day of the week
NOTE: The Weekends setting (Sat/Sun) is not
functional at this time.
Press the ENTER button to
accept. The screen flashes the
hours.
Press the + or – button to set the
hours you want (“11:00 PM” in
this example).
1.
2.
3.
4.
•
•
•
5.
6.