12 HomeSettings HA07 Wireless Master Controller
Copyright © 2007 Intermatic, Inc.
Removing modules from the network
As a separate procedure, you can remove
or “exclude” a module from your network—
something you would do if you were moving it to a
new location (when moving a module, you should
first exclude it, then include it at the new location)
or if you simply didn’t plan to use it any more.
As long as it’s included in the network according
to your original setup, the network will always
be looking for it—which will have a negative
effect on your network’s responsiveness.
To remove or exclude a module from your network,
follow the procedure Deleting or “Excluding” on
page 10.
NOTE: If you exclude a module from your network,
it is automatically excluded from any scene where
you have associated it.
To Next Page
Loading...
