Setup and User Guide 35
Providing a brighter solution.™
Everyday use of the HA07 Controller
Choosing the operating mode
Once you’ve completed setup, the HA07 is easy to
use. Press the MODE button to cycle through the
operation methods available. The top of the screen
displays the MODE you’ve selected:
AUTO—means that the events you have set will run
automatically, as you have set them up.
AUTORAND—or “automatic random,” means that
the events you have set will run automatically but
will occur plus or minus 15 minutes from your exact
times you set. This is a security feature that gives
your house a more “lived-in” look.
MAN—means that the modules in your network will
only turn ON or OFF manually by using the ON and
OFF buttons. Events you have set up will not run.
NOTE: You can always press the ON and OFF
buttons manually to control specific channels
when the HA07 is set on AUTO or AUTORAND.
Manual use
To turn a channel ON—Press and release the ON
button for the assigned channel.
To turn a channel OFF—Press and release the OFF
button for the assigned channel.
To DIM UP—press and hold the ON button.
To DIM DOWN—press and hold the OFF button.
Everyday use of the HA07 ControllerEveryday use of the HA07 Controller
To Next Page
Loading...
Need help?
General
