Intermatic HA07 - Resetting Channels Only; Resetting Network and Channels; Deleting Modules from Scenes

40 HomeSettings HA07 Wireless Master Controller
Copyright © 2007 Intermatic, Inc.
Resetting channels only
Follow the same procedure as Resetting the
network only, except press the Channel 2 ON/DIM▲
and OFF/DIM▼ buttons in Step 2. The screen will
display “CHAN CLEAR”.
Resetting network and channels together
This reset function will completely reset all
CLOCK, PROGRAMMED EVENTS, CHANNEL, and
NETWORK SETTINGS on the controller.
Follow the same procedure as Resetting the
network only, except press Channel 1 ON/DIM▲ and
OFF/DIM▼ buttons in Step 2. The screen will display
“ALL CLEAR”.
Deleting modules from a scene
You can also delete or remove a module from a
scene (from the channel where it’s assigned). You
need to do this if:
You have relocated and re-included a module
You want to change which channel controls the
module.
Use the following instructions to remove or exclude
a module from a channel.
Press the PROGRAM button (the black button) on
the module to make sure the LED on the device
is lighted.
•
•
1.