Intermatic HA07 - Removing from ALL ON;OFF Control

42 HomeSettings HA07 Wireless Master Controller
Copyright © 2007 Intermatic, Inc.
Removing modules from ALL ON and ALL OFF
control
Use the following procedure to exclude modules
from control by your ALL ON and ALL OFF buttons:
Press and hold both ALL ON
and ALL OFF button until the
screen displays the word
“ALLSET”.
Press and hold the
DELETE button on the
HA07 Master
Controller. The screen
adds “DEL”.
Press and release
the PROGRAM button
on a module you
want to exclude.
The LED on the module changes (to ON or
OFF) and the screen adds the words “DEL” and
“SUCCESSFUL” FOR 2 seconds.
NOTE: If “NOT SUCCESSFUL” appears on
the screen, repeat these steps until the screen
displays “SUCCESSFUL”.
Release the DELETE button.
Repeat this procedure with each other module
you want to remove from ALL ON and ALL OFF
control.
1.
2.
3.
4.
5.
DELDEL
SUCCESSFUL
DEL
SUCCESSFUL
DEL