Intermatic HA07 - Page 30

30 HomeSettings HA07 Wireless Master Controller
Copyright © 2007 Intermatic, Inc.
OPTIONAL: If this ON event will control scenes
using dimming modules and you want to
protect dimming levels already set, press and
release the ALL ON button. The
screen changes from 7 dimmer
bars to 4 dimmer bars.
Press the ON channel button(s)
for the scenes (groups of
lights) you want the event to
control. Use the SHIFT button if
necessary. The display puts a box around each
scene you select and blinks that boxed number.
Press the ENTER button to
accept your settings. The screen
displays the program you have
just set with the event number
blinking.
At this point you have several options:
If you want to make any changes in the
settings for this event, press the + button and
return to Step 3. Work your way through the
steps as necessary and make the necessary
changes.
If you want to set up another
event, press the ENTER
button. The screen Displays
the next event for setting up.
Proceed with instructions for setting an ON
event.
If you’re finished setting up events, press the
MODE button to exit programming and enter
AUTO mode, which activates your settings.
10.
11.
12.
13.
•
•
•