Intermatic HA07 - Page 25

Setup and User Guide 25
Providing a brighter solution.™
Continue pressing the + button
until the screen displays SNST
(sunset) or SNUP (sunup)—
whichever you want. This example uses SNST.
Press and release the + button
until the day or series of days
you want the timer to turn ON is
blinking. You can select:
Every day
Weekdays only
An individual day of the week
NOTE: The Weekends setting (Sat/Sun) is not
functional at this time.
Press the ENTER button to
accept. The dimmer panel
begins blinking.
OPTIONAL: If this ON event will control scenes
using dimming modules and you want to
protect dimming levels already set, press and
release the ALL ON button. The
screen changes from 7 dimmer
bars to 4 dimmer bars.
Press the ON channel button(s)
for the scenes (groups of
lights) you want the event to
control. Use the SHIFT button if
necessary. The display puts a box around each
scene you select and blinks that boxed number.
4.
5.
•
•
•
6.
7.
8.