Intermatic HA07 - Page 27

Setup and User Guide 27
Providing a brighter solution.™
time, and with the event number blinking. This is
a new event.
Press the + button. The screen changes and
flashes the days of the week.
Continue pressing the + button
until the screen displays SNST
(sunset) or SNUP (sunup),
whichever you want. This example uses SNST:
Continue pressing the + button
until the day or series of days
you want the timer to turn OFF
is blinking. You can select:
Every day
Weekdays only
An individual day of the week
NOTE: The Weekends setting (Sat/Sun) is not
functional at this time.
Press the ENTER button to
accept. The dimmer panel
begins blinking.
Press the ON channel button(s)
for the scenes (groups of
lights) you want the event to
control. Use the SHIFT button if
necessary. The display puts a box around each
scene you select and blinks that boxed number.
Press and release the ALL OFF
button until the dimmer box
says OFF and shows no bars.
3.
4.
5.
•
•
•
6.
7.
8.