Intermec EasyCoder C4 User Manual

Intermec EasyCoder C4—User’s Guide 33
Appendix A—Technical Data
Printable Area
Width, max at 203.2 dpi 104.0 mm (4.1 inches)
Width, max at 300 dpi 102.2 mm (4.02 inches)
Length, max. (512K SRAM/203.2 dpi): 472.5 mm (18.6 inches)
Length, max. (512K SRAM/300 dpi): 220.0 mm (8.6 inches)
Media
Roll Diameter, max: 125 mm (5 inches)
Core Diameter, min/max: 25.4/38.1 mm (1.0/1.5 inches)
Media Width, max: 116.0 mm (4.57 inches)
Media Width, min. 25.4 mm (1.0 inches)
Label Length, min: 6.35 mm (.25 inches)
Max. Thickness, rolls: 0.15 mm (.0006 inches)
Max. Thickness, fan-folds: 0.17 mm (0.006 inches)
Min. Thickness, all: 0.06 mm (.003 inches)
Thermal Transfer Ribbons
Intermec transfer ribbons only (wax, hybrid, and resin) in widths of 33, 60, 63.5, 83.5,
89, and 110 mm (1.33, 2.36, 2.5, 3.29, 3.5, and 4.33 inches) centered on 110 mm (4.33
inches) wide cardboard cores.
Core inner diameter: 13 mm (0.5 inches)
Max. ribbon roll diameter: 41 mm (1.6 inches).
Ink coated side facing outwards, cores with notches
Printing Speed
8 dots/mm 30, 40, 50, or 75 mm/sec.
(1.2, 1.6, 2, or 3 inches/sec.)
11.81 dots/mm 30, 40, or 50 mm/sec.
(1.2, 1.6, or 2 inches/sec.)
Sensors
Label gap, label mark, label taken, out-of-media, ribbon end, print frame open/closed.
Print Directions
Text, bar codes, and graphics can be printed in four directions.
Fonts
5 resident alphanumeric fonts (can be magnifi ed up to 8 times horizontally and 9 times
vertically)
Bar Codes
Code 39 std. or extended
Code 39 w. check digit

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English