Intermec EasyCoder PF2i User Manual

Chapter 7 — Setup Mode
76 EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version)
Setup Mode; Serial Communication “uart3:” (option)
(Intermec Fingerprint v8.20)
NEW LINE:
CR
NEW LINE:
LF
DATA TO HOST:
ENABLE
DATA FROM HOST:
ENABLE
BAUDRATE;
4800
BAUDRATE;
2400
BAUDRATE;
1200
BAUDRATE;
600
BAUDRATE;
300
BAUDRATE;
115200
BAUDRATE;
57500
BAUDRATE;
38400
BAUDRATE;
19200
PARITY:
SPACE
PARITY:
MARK
PARITY:
ODD
PARITY:
EVEN
CHAR LENGTH
7
STOP BITS:
2
ENQ/ACK:
ENABLE
SETUP:
SER-COM, UART3
SER-COM, UART3:
BAUDRATE
SER-COM, UART3:
CHAR LENGTH
SER-COM, UART3:
PARITY
SER-COM, UART3:
STOP BITS
SER-COM, UART3:
FLOWCONTROL
BAUDRATE;
9600
CHAR LENGTH
8
PARITY:
NONE
STOP BITS:
1
FLOW CONTROL:
RTS/CTS
FLOW CONTROL:
ENQ/ACK
ENQ-ACK:
DISABLE
ENQ/ACK:
ENABLE
RTS/CTS:
DISABLE
SER-COM, UART3:
CONNECTED HW
CONNECTED HW:
RS232
FLOW CONTROL:
XON/XOFF
SER-COM, UART3:
NEW LINE
NEW LINE:
CR/LF
XON/XOFF:
DATA TO HOST
XON/XOFF:
DATA FROM HOST
DATA TO HOST:
DISABLE
DATA FROM HOST:
DISABLE
SER-COM, UART3:
REC BUF
REC BUF:
[1024]:
SER-COM, UART3:
TRANS BUF
TRANS BUF:
[1024]:
Read-only
These menus will only be displayed when an optional Double Serial interface board is installed,
also see the overview for Serial Communication, uart2.

Intermec EasyCoder PF2i Specifications

General

Brand	Intermec
Model	EasyCoder PF2i
Category	Printer Accessories
Language	English