Intermec EasyCoder PF2i - Page 92

Chapter 7 — Setup Mode
EasyCoder PF2i Bar Code Label Printer User’s Guide (Fingerprint Version) 77
Setup Mode; Network Communication “net1:” (option)
(Intermec Fingerprint v8.20)
BAUDRATE;
CR
BAUDRATE;
LF
PARITY:
BOOTP
PARITY:
DHCP
PARITY:
MANUAL
SETUP:
NET-COM, NET1
SETUP:
NETWORK
NET-COM, NET1:
NEW LINE
NETWORK:
IP SELECTION
NETWORK:
IP ADDRESS
NETWORK:
NETMASK
NETWORK:
DEFAULT ROUTER
NETWORK:
NAME SERVER
NEW LINE
CR/LF
IP SELECTION:
DHCP+BOOTP
IP ADDRESS:
192.168.1.79
NETMASK:
255.255.255.0
DEFAULT ROUTER:
192.168.1.1
NAME SERVER:
192.168.1.7
NETWORK:
MAC ADDRESS
MAC ADDRESS:
00104017b80e
Read-only if DCHP
and/or BOOTP
is selected.
These menus will only be displayed when an optional EasyLAN interface board is installed.