Appendix A — Specifications and Default Settings
PC23 and PC43 Desktop Printer User Manual 133
PC43d Physical Specifications
Dimensions: 16.8 cm x 18.0 cm x 21.5 cm
(6.61 in x 7.09 in x 8.46 in)
Weight: 1.72 kg (3.80 lbs)
Power Supply Requirements: 100–240 VAC, 50–60 Hz, 60W
Operating Temperature: 5°C to 40°C (41°F to 104°F)
Storage Temperature: -40°C to 60°C (-40°F to 140°F)
Relative Humidity: 20 to 80% non-condensing
PC43d Print Speed, Resolution, and General Media
Specifications
Print Mode: Direct thermal
Print Speed (variable): 203 dpi: 50 to 200 mm/sec (2 to 8 ips)
300 dpi: 50 to 150 mm/sec (2 to 6 ips)
Print Resolution: 203 dpi: 8 dots/mm
300 dpi: 11.8 dots/mm
Print Width: 203 dpi: 104 mm (4.09 in) max
300 dpi: 106 mm (4.17 in) max
Media Width: 19.05 to 118 mm (0.75 to 4.65 in)
Label Roll Diameter (maximum): 127 mm (5 in)
Label Length (minimum): 6.35 mm (.25 in)
Gap Length Between Labels: 2 to 10 mm (0.08 to 0.39 in)
Black Mark Length 3 to 10 mm (0.12 to 0.39 in) centered
between tickets, 15% maximum
reflectance
Media Thickness: 76.2 to 203 μm (3 to 8 mil)
Media Density: 60 to 181 g/m2
Liner Opacity (maximum): 76% (TAPPI T425)
Gap and Black Mark Sensor Adjustable from left media edge to 4.5
mm right of center on LCD printers
(fixed at center on Icon printers)
To Next Page
Loading...
