Intermec PC23d

Appendix A — Specifications and Default Settings
PC23 and PC43 Desktop Printer User Manual 155
Wireless 802.11 Network Settings
This section describes the 802.11 IPv4 and IPv6 settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Network > IPv4 or IPv6.
• From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Setting Description Default
(IPv4) IP
Assignment
Method
Sets how the printer obtains an IP address (for IPv4
networks).
DHCP
(IPv4) IP Address Sets the unique network-level address that is assigned to
each device in an IPv4 network.
0.0.0.0
Subnet Mask Sets a number that defines the range of IP addresses that
can be used in an IPv4 network.
0.0.0.0
Default Router Sets the IP address of a router that is used when a device
sends a packet to another subnet or to an unknown
destination.
0.0.0.0
DHCP Response Sets if the printer receives DHCP responses by broadcast or
unicast.
Broadcast
(IPv6) IP
Assignment
Method
Sets how the printer obtains an IP address (for IPv6
networks).
Automatic
(IPv6) IP Address Sets the unique network-level address that is assigned to
each device in an IPv6 network.
Automatic