Chapter 1 — About the Printers
PC23 and PC43 Desktop Printer User Manual 27
• Dispose of any used batteries according to the instructions that
came with the battery.
Charge the Battery
To charge the battery, install the printer on the battery base and
connect the base to AC power. The battery begins to charge and the
battery base LEDs turn on to indicate charge status. The battery is fully
charged in 4 hours.
Note: To charge the battery in the battery base, the PC43d must be
correctly installed on the base.
Note: The LEDs do not turn on if the printer power switch is on, or if
the battery base is not connected to AC power.
To Next Page
Loading...
