EasyManuals Logo

Intermec PC23d User Manual

Intermec PC23d
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #91 background imageLoading...
Page #91 background image
Chapter 3 — Connect the Printer
PC23 and PC43 Desktop Printer User Manual 79
Wireless 802.11 Network Settings
This section describes the 802.11 IPv4 and IPv6 settings. To view these
settings:
From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Network > IPv4 or IPv6.
From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Setting Description Default
Network
Name (SSID)
Defines the wireless network. To
communicate, all access points and wireless
devices must have the same network name,
which is case-sensitive.
INTERMEC
Network
Type
Selects the radio behavior of the printer. Ad
Hoc mode allows the printer to communicate
directly with another printer. Infrastructure
mode allows the printer to communicate
through an access point.
Infrastructure
Roaming Controls the roaming inclination of the
printer. The higher the level, the less inclined
the printer is to switch access points based on
the printer received signal strength (RSSI).
Off
Power Mode Select the power management setting for the
radio. Constant Awake provides the highest
throughput but draws the most power. Power
Saving conserves the most power but
provides the lowest throughput. Fast Power
Saving turns off components when they are
not being used to draw less current.
Constant
Awake
Channel Sets the common channel that radios in Ad
Hoc mode use to transfer data. Range is 1 to
14.
1
Hidden
SSID
Determines if the radio is allowed to look for
SSIDs that have been hidden to prevent
unauthorized devices from connecting to the
wireless network.
Disable

Table of Contents

Other manuals for Intermec PC23d

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intermec PC23d and is the answer not in the manual?

Intermec PC23d Specifications

General IconGeneral
Color-
Print technologyDirect thermal
Maximum resolution203 x 203 DPI
Maximum print height- mm
Maximum printing width56 mm
Plug and PlayYes
Sustainability certificatesENERGY STAR
CertificationCE, RoHS
Internal memory128 MB
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
AC adapter output current2.5 A
AC adapter output voltage24 V
DisplayLCD
Product colorWhite
Operating temperature (T-T)5 - 40 °C
Operating relative humidity (H-H)10 - 80 %
USB 2.0 ports quantity2
Connectivity technologyWired
Quantity per pack1 pc(s)
Maximum label width60 mm
Maximum label length1727 m
Maximum roll diameter127 mm
Supported paper width15 - 60 mm
Weight and Dimensions IconWeight and Dimensions
Depth215 mm
Width125 mm
Height177 mm
Weight1450 g

Related product manuals