Intermec PC23d

Appendix A — Specifications and Default Settings
144 PC23 and PC43 Desktop Printer User Manual
• RFID Not Installed
• Printhead Lifted
• Printhead Not Detected
• Motor Too Hot
• Power Supply Too Hot
Information Alerts
Information alerts are sent when a print job is started or completed, or
when the printer is rebooting. These alerts include:
• Print Job Complete
• Printer is Rebooting
• Started (Sent when a print job has begun)
Warning Alerts
Warning alerts are sent when the printer may need attention shortly,
such as when the printhead needs maintenance, or when the odometer
has reached a present value. A warning alert is also sent when the
printer firmware is being upgraded. Warning alerts include:
• Ribbon Installed (Sent when the printer is set for direct thermal
printing but has ribbon installed for thermal transfer printing)
• Ribbon Low
• Upgrading Firmware
• Odometer (User Resettable)
• Odometer (Printer)
• Replace Printhead
• Clean Printhead
• Faulty Dot (Sent when a faulty dot is detected in the printhead,
which can lead to lower print quality)