Chapter 2 — Set Up the Printer
54 PC23 and PC43 Desktop Printer User Manual
Use External Media
To use large rolls of media or tag stock, place the media behind the
printer, and feed the media into the printer through the external media
feed slot.
Be sure you thread the media through the media holders or media
guides as you would for media installed inside the printer.
Connect the Printer to Power
1 Connect the power adapter to the power port on the rear of the
printer.
2 Connect the power adapter to AC power. When the adapter is
connected to AC power, the green LED in the adapter connector
turns on and stays on.
Use only the AC power adapter supplied with the printer. The use
of a power adapter not approved by Intermec voids the product
warranty and may damage the printer.
To Next Page
Loading...
