Chapter 2 — Set Up the Printer
32 PC23 and PC43 Desktop Printer User Manual
Adjust the Media Holders
The first time you load media in the printer, or when you use different
sizes of media, you must adjust the media holders. After you adjust the
media holders, you do not need to adjust them again for a new roll of
the same size media.
1 Pull one or both of the printer latches toward the front of the
printer and lift the printer lid.
Note: The illustrations show the PC43d printer. Adjusting the media
holders is done the same way for all printers.
To Next Page
Loading...
