Intermec PC23d

Chapter 3 — Connect the Printer
74 PC23 and PC43 Desktop Printer User Manual
2 For a non-DHCP network (using a static IP address):
• For an LCD printer, from the Main Menu select Settings >
Communications > Ethernet and change the settings as
needed.
• For an icon printer, configure the Ethernet settings through
PrintSet.
Ethernet Settings
This section describes the Ethernet IPv4 and IPv6 settings. To view
these settings:
• From the printer Main Menu, select Settings > Communications
> Ethernet.
• From the printer web page, click the Configure tab >
Communications > Ethernet.
Setting Description Default
(IPv4) IP
Assignment
Method
Specifies how the printer obtains an IP
address.
DHCP
(IPv4) IP Address Specifies the unique network-level address
that is assigned to each device in a TCP/IP
network (IPv4).
0.0.0.0
Subnet Mask Specifies a number that defines the range of
IP addresses that can be used in a TCP/IP
network.
0.0.0.0
Default Router Specifies the IP address of a router that is
used when a device sends a packet to
another subnet or to an unknown
destination.
0.0.0.0
DHCP Response Specifies if the printer receives DHCP
responses by broadcast or unicast.
Broadcast
(IPv6) IP
Assignment
Method
Specifies how the printer obtains an IP
address (for IPv6 networks).
Automatic
(IPv6) IP Address Specifies the unique network-level address
that is assigned to each device in a TCP/IP
network (IPv6).
Automatic