Chapter 1 — About the Printers
28 PC23 and PC43 Desktop Printer User Manual
Use the Battery Base
After you charge the battery base, you can use it to supply power to the
PC43d printer.
1 Install the battery in the battery base and install the printer on the
base.
2 Charge the battery base.
3 Disconnect the power cable from the base.
4 Turn the printer on. The base LEDs turn off.
Battery Base LEDs While Printer is Off
LEDs Battery Charge Level
95% to 100%
76% to 94%
51% to 75%
26% to 50%
0% to 25%
Battery out of charging
temperature range.
Battery error.
To use the battery base, the PC43d must be installed on the base
correctly.
To Next Page
Loading...
