Chapter 3 — Connect the Printer
80 PC23 and PC43 Desktop Printer User Manual
Wireless 802.11 Security Settings
This section describes the 802.11 security settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Security.
• From the printer web page, click the Configure tab >
Communications > Wireless 802.11.
Setting Description Default
(IPv4) IP
Assignment
Method
Sets how the printer obtains an IP
address (for IPv4 networks).
DHCP
(IPv4) IP Address Sets the unique network-level address
that is assigned to each device in an
IPv4 network.
0.0.0.0
Subnet Mask Sets a number that defines the range of
IP addresses that can be used in an IPv4
network.
0.0.0.0
Default Router Sets the IP address of a router that is
used when a device sends a packet to
another subnet or to an unknown
destination.
0.0.0.0
DHCP Response Sets if the printer receives DHCP
responses by broadcast or unicast.
Broadcast
(IPv6) IP
Assignment
Method
Sets how the printer obtains an IP
address (for IPv6 networks).
Automatic
(IPv6) IP Address Sets the unique network-level address
that is assigned to each device in an
IPv6 network.
Automatic
To Next Page
Loading...
