16
Version 3.0 (04/2013) en
Translation of the original instructions
RollerDrive EC100 / EC110
Transport and storage
Transport
• Each RollerDrive is covered at its ends with end-protectors.
Do not stack pallets.
Check the fixation of the RollerDrives before transport.
Avoid hard shocks during transport.
Check each RollerDrive visually for damage after transport.
In case of damage, take photos of the damaged parts.
To maintain the warranty, instantly report any damage caused during
transport to the transport company and to Interroll.
Do not transfer the RollerDrives between warm and cold environments as this
may cause condensing water.
Storage
Check each RollerDrive for damage after storage.
Risk of injury due to improper transport
Transport may only be carried out by qualified and
authorized persons.
Observe the following notices.
Risk of injury due to improper storage
Do not stack pallets.
Do not stack more than four carton boxes.
To Next Page
Loading...
Need help?
General
