2
Version 3.0 (04/2013) en
Translation of the original instructions
RollerDrive EC100 / EC110
Introduction
Information about the operating instructions
In this manual the RollerDrives EC100 and EC110 are referred to as RollerDrive
EC1xx.
Contents This manual contains important advice, notes and information about the
RollerDrive EC1xx in all phases of its lifecycle:
• Transport, assembly and start-up
• Safe operation, maintenance and troubleshooting, disposal
• Accessories
Validity of the manual The manual describes the RollerDrive EC1xx as it is delivered by Interroll.
In addition to this manual, special contractual agreements and technical
documents apply to special versions.
The manual is part of the
product
For trouble-free, safe operation and warranty claims, read the manual and
follow the instructions before handling the RollerDrive EC1xx.
Keep the manual near to the RollerDrive EC1xx.
Pass the manual on to any subsequent operator or occupant of the
RollerDrive EC1xx.
Interroll does not accept any liability for malfunctions or defects due to non-
observance of this manual.
If you have any questions after reading the operation manual, feel free to
contact our customer service. See the last page for your local contact.
Warnings in this manual
The warnings in this document refer to risks which may arise while using the
RollerDrive EC1xx. For relevant warnings, see "Safety", page 4 and the warnings
at the beginning of each chapter.
There are three categories of danger. The following signal words are used in the
document as required:
• Danger
• Warning
• Caution
Signal word Meaning
Danger Indicates a hazardous situation which, if not
avoided, will result in death or serious injury.
Warning Indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
Caution Indicates a hazardous situation which, if not
avoided, may result in minor or moderate injury.
To Next Page
Loading...
