Interroll RollerDrive EC100 User Manual

27
Version 3.0 (04/2013) en
Translation of the original instructions
RollerDrive EC100 / EC110
Abandonment and disposal
Abandonment
 Disconnect the motor cable from the control.
 Unscrew the outer nut at the threaded motor shaft.
 If the RollerDrive has a spring-loaded idler shaft, push the idler shaft inwards.
 If the RollerDrive has a FTM8 idler shaft, unscrew the bolt at the idler shaft.
 Extract the RollerDrive from the conveyor frame.
Disposal
The operator is responsible for the proper disposal of the RollerDrive. In doing
so, industry-specific and local provisions must be observed for the disposal of the
RollerDrive and its packaging.
Risk of injury due to improper handling
 Abandonment may only be executed by qualified and
authorized persons.
 Only abandon the RollerDrive after switching off the
power. Ensure that the RollerDrive cannot be turned on
accidentally.
CAUTION

Interroll RollerDrive EC100 Specifications

General

Brand	Interroll
Model	RollerDrive EC100
Category	DC Drives
Language	English