60 | Optidrive P2 User Guide | Version 3.00 www.invertekdrives.com
Par. Function Units
P0-46 Ambient over temperature trip count N/A
P0-47 I/O processor error count N/A
P0-48 DSP error count N/A
P0-49 Modbus RTU error count N/A
P0-50 CAN error count N/A
P0-51 PDI cyclic data N/A
P0-52 PDO cyclic data N/A
P0-53 U phase offset and reference N/A
P0-54 V phase offset and reference N/A
P0-55 Reserved N/A
P0-56 Brake transistor maximum on time and duty N/A
P0-57 Ud / Uq N/A
P0-58 Encoder speed value Hz / RPM
P0-59 Frequency input reference Hz / RPM
P0-60 Calculated slip Hz / RPM
P0-61 Relay Hysteresis value Hz / RPM
P0-62 Droop speed Hz / RPM
P0-63 Post ramp speed reference Hz / RPM
P0-64 Effective switching frequency kHz
P0-65 Drive life time HH:MM:SS
P0-66 Function block program ID N/A
P0-67 Fieldbus torque reference %
P0-68 User ramp value S
P0-69 I2C error count N/A
P0-70 Option module type N/A
P0-71 Fieldbus interface type N/A
P0-72 Ambient temperature →C
P0-73 24 hour timer Minute
P0-74 L1 – L2 input voltage V
P0-75 L2 – L3 input voltage V
P0-76 L3 – L1 input voltage V
P0-77 Test parameter N/A
P0-78 Test parameter N/A
P0-79 Motor control & DSP version N/A
P0-80 User specified internal value (P6-28) N/A
8
Extended Parameters
To Next Page
Loading...
Need help?
General
