INVT iMars MG Series User Manual

INVT iMars MG series grid-tied solar inverters Installation
3.1 Unpacking inspection
Inspect the information of the order and the name plate to ensure the product are the ordered one
and no damage to the package. If any problem, contact the supplier as soon as possible.
Put the inverter into the package if not used and protect it from humidity and dust.
Check as following after unpacking:
(1) Ensure no damage to the inverter unit;
(2) Ensure the operation manual, port and installation accessories in the package;
(3) Ensure no damage or loss to the items in the package;
(4) Ensure the information of the order are the same as that of the name plate;
(5) The delivery list of single-phase inverter is different from that of three-phase inverter.
Below are the detailed lists:
Packing list of single-phase inverter:
Figure 3.1 Packing list of single-phase inverter
Table 3-1 Detailed delivery list of single-phase inverter
No. Name Quantity
1
MG750TL/MG1KTL/MG1K5TL /
MG2KTL/MG3KTL/
MG4KTL/MG4K6TL/MG5KTL/
MG3KTL-2M/MG4KTL-2M/
MG4K6TL-2M/MG5KTL-2M inverter
1
2 Installation bracket 1
- 19 -

INVT iMars MG Series Specifications

General

Brand	INVT
Model	iMars MG Series
Category	Inverter
Language	English