INVT iMars MG Series User Manual

INVT iMars MG series grid-tied solar inverters Safety precautions
1.1 Icons
This manual provides relevant information with icons to highlight the physical and property safety
of the user to avoid device damage and physical injury.
The icons used in this manual are listed below:
Icons Name Instruction Abbreviation
Danger
Danger
Serious physical injury or even death may
occur if not follow the relative requirements
Warning
Warning
Physical injury or damage to the devices
may occur if not follow the relative
requirements
Do not
Do not
Damage may occur if not follow the relative
requirements
Hot sides
Hot
sides
Sides of the device may become hot. Do not
touch.
Note Note
Physical hurt may occur if not follow the
relative requirements
Note
1.2 Safety guidelines
 The first thing after receiving is to check for any visible damage to the package
or to the inverter. If there is something suspect
ed, contact the shipping
company and local dealer before installing.
 Only qualified electricians are allowed to operate on the inverter.
 Do not carry out any wiring and inspection or changing components when the
power supply is applied. Hazardous voltages may still be present in the inverter
even if the AC and DC main switches are switched off. Wait at least 5 minutes
after switching off the inverter. This ensures that the capacitors are electrically
discharged.
 This product can cause a d c current in the external protective earth conductor.
Where a residual current-operated protective (RCD) or monitoring (RCM)
device is strongly recommend to used for protection in a case of direct or
indirect contact, only an RCD or RCM of Type B is allowed on the supply side
of this product;
- 6 -

INVT iMars MG Series Specifications

General

Brand	INVT
Model	iMars MG Series
Category	Inverter
Language	English