INVT iMars MG Series User Manual

INVT iMars MG series grid-tied solar inverters Installation
3.4 Electrical installation
This section proposes to describe detailed electrical installation and related safety instructions.
i
SPD
Public Grid
iMars Grid-tied Solar Inverter
Communication Converter
SPD
Feeding Meter
Solar PV Modules
Monitoring Equipment
O
F
F
O
F
F
QF
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
O
F
F
QF
O
F
F
O
F
F
QF
O
F
F
O
F
F
Figure 3.7 Block diagram of the grid-tied solar system
 Improper operation during the wiring process can cause fatal injury to operator
or unrecoverable damage to the inverter. Only qualified personnel can perform
the wiring work.
 All electrical installations must be in accordance with local and national electrical
codes.

All cables must be firmly attached, undamaged, properly insulated and
adequately dimensioned.
Note
 Read and follow the instructions provided in this section while observing all
safety warnings.
 Always note the rated voltage and current defined in this manual. Never exceed
the limits.
- 25 -

INVT iMars MG Series Specifications

General

Brand	INVT
Model	iMars MG Series
Category	Inverter
Language	English